FK617 Semi Atomatik Case Labeling Machine
Shari'ar Abokin ciniki:
Siga:
| Siga | Bayanai |
| Ƙayyadaddun Label | m sitika, m ko opaque |
| Yin Lakabi Haƙuri | ± 0.5mm |
| Iyawa (pcs/min) | 15 ~ 30 |
| Girman kwalabe (mm) | L: 20 ~ 200 W: 20 ~ 150 H: 0.2 ~ 120; Za a iya musamman |
| Girman lakabin kwat da wando (mm) | L: 15-100;W (H): 15-130 |
| Girman Injin (L*W*H) | ≈960*560*930(mm) |
| Girman Kunshin (L*W*H) | ≈1180*630*980(mm) |
| Wutar lantarki | 220V/50(60)HZ; Za a iya musamman |
| Ƙarfi | 660W |
| NW (KG) | ≈45.0 |
| GW(KG) | ≈ 67.5 |
| Lakabin Roll | ID: Ø76mm; OD: ≤240mm |
| Samar da Jirgin Sama | 0.4 zuwa 0.6Mpa |
Tsarin:
| A'a. | Tsarin | Aiki |
| 1 | Label Tire | sanya lakabin nadi. |
| 2 | Rollers | iska da lakabin nadi. |
| 3 | Label Sensor | gano lakabin. |
| 4 | Ƙarfafa Silinda | fitar da na'urar ƙarfafawa. |
| 5 | Na'urar Ƙarfafawa | label mai santsi yayin yin lakabi da sanya shi manne. |
| 6 | Kafaffen Samfur | na al'ada, gyara samfur yayin yin lakabi. |
| 7 | Mai jigilar kaya | Motar ke motsa shi, watsa samfur yayin yin lakabi. |
| 8 | Na'urar jan hankali | motar motsa jiki ta motsa don zana lakabin. |
| 9 | Sake sake yin amfani da Takarda | sake sarrafa takardan saki. |
| 10 | Tasha Gaggawa | dakatar da injin idan yayi kuskure. |
| 11 | Akwatin Lantarki | sanya saitunan lantarki. |
| 12 | Kariyar tabawa | aiki da saitin sigogi. |
| 13 | Tace Kewaye | tace ruwa da kazanta. |
Siffofin:
1) Tsarin Gudanarwa: Tsarin kula da Panasonic na Japan, tare da babban kwanciyar hankali da ƙarancin gazawa.
2) Tsarin aiki: Allon taɓawa mai launi, ƙirar gani kai tsaye mai sauƙin aiki. Sinanci da Ingilishi akwai.Sauƙi don daidaita duk sigogin lantarki kuma suna da aikin kirgawa , wanda ke taimakawa don sarrafa samarwa.
3) Tsarin Ganewa: Yin amfani da firikwensin lakabin LEUZE/Italian Datalogic firikwensin da firikwensin samfurin Panasonic na Jafananci, waɗanda ke da kula da lakabin da samfur, don haka tabbatar da daidaito mai tsayi da aikin lakabi.Yana ceton aiki sosai.
4) Ayyukan ƙararrawa: Injin zai ba da ƙararrawa lokacin da matsala ta faru, kamar zubewar lakabin, lakabin karya, ko wasu rashin aiki.
5) Machine Material: The inji da kayayyakin gyara duk amfani da kayan bakin karfe da anodized babban aluminum gami, tare da high lalata juriya da taba tsatsa.
6) A ba da kayan wutan lantarki don dacewa da wutar lantarki na gida.