FK618 Semi Atomatik Babban Madaidaicin Lakabi Mai Lakabi tare da Labulen Haske
Shari'ar Abokin ciniki:
Siga:
| Siga | Bayanai |
| Ƙayyadaddun Label | m sitika, m ko opaque |
| Yin Lakabi Haƙuri | ± 0.2mm |
| Iyawa (pcs/min) | 15 ~ 30 |
| Girman kwalabe (mm) | L: 20 ~ 200 W: 20 ~ 180 H: 0.2 ~ 75; Za a iya musamman |
| Girman lakabin kwat da wando (mm) | L: 10-70;W (H): 5-70 |
| Girman Injin (L*W*H) | ≈600*500*800 (mm) |
| Girman Kunshin (L*W*H) | ≈650*550*850(mm) |
| Wutar lantarki | 220V/50(60)HZ; Za a iya musamman |
| Ƙarfi | 330W |
| NW (KG) | ≈45.0 |
| GW(KG) | ≈ 67.5 |
| Lakabin Roll | ID: Ø76mm; OD: ≤240mm |
| Samar da Jirgin Sama | 0.4 zuwa 0.6Mpa |
Tsarin:
| A'a. | Tsarin | Aiki |
| 1 | Label Tire | sanya lakabin nadi. |
| 2 | Rollers | iska da lakabin nadi. |
| 3 | Label Sensor | gano lakabin. |
| 4 | Silinda mai aikewa | aika lakabin ƙasa da kan lakabin. |
| 5 | Label-peeling Silinda | fitar da kan lakabin don samun lakabin daga takardar saki. |
| 6 | Lakabin Silinda | fitar da kan lakabin zuwa lakabin sanda zuwa matsayi mai nunawa. |
| 7 | Labeling Head | sami lakabin daga takardar saki kuma manne da samfur. |
| 8 | Kafaffen Samfur | na al'ada, gyara samfur yayin yin lakabi. |
| 9 | Na'urar jan hankali | motar motsa jiki ta motsa don zana lakabin. |
| 10 | Sake sake yin amfani da Takarda | sake sarrafa takardan saki. |
| 11 | Tasha Gaggawa | dakatar da injin idan yayi kuskure. |
| 12 | Akwatin Lantarki | sanya saitunan lantarki. |
| 13 | Kariyar tabawa | aiki da saitin sigogi. |
| 14 | Tace Kewaye | tace ruwa da kazanta. |
Siffofin:
1) Tsarin Gudanarwa: Tsarin kula da Panasonic na Japan, tare da babban kwanciyar hankali da ƙarancin gazawa.
2) Tsarin aiki: Allon taɓawa mai launi, ƙirar gani kai tsaye mai sauƙin aiki. Sinanci da Ingilishi akwai.Sauƙi don daidaita duk sigogin lantarki kuma suna da aikin kirgawa , wanda ke taimakawa don sarrafa samarwa.
3) Tsarin Ganewa: Yin amfani da firikwensin lakabin LEUZE/Italian Datalogic firikwensin da firikwensin samfurin Panasonic na Jafananci, waɗanda ke da kula da lakabin da samfur, don haka tabbatar da daidaito mai tsayi da aikin lakabi.Yana ceton aiki sosai.
4) Ayyukan ƙararrawa: Injin zai ba da ƙararrawa lokacin da matsala ta faru, kamar zubewar lakabin, lakabin karya, ko wasu rashin aiki.
5) Machine Material: The inji da kayayyakin gyara duk amfani da kayan bakin karfe da anodized babban aluminum gami, tare da high lalata juriya da taba tsatsa.
6) A ba da kayan wutan lantarki don dacewa da wutar lantarki na gida.