FK815 yana da ƙarin ayyuka don haɓakawa:
1. Kanfigareshan code printer ko tawada-jet printer, a lokacin da lakabi, buga bayyana samfurin tsari lambar, samar kwanan wata, m kwanan wata da sauran bayanai, coding da lakabi za a za'ayi lokaci guda.
2. Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwaƙwalwa na Ƙaƙwalwa na Ƙaƙwalwa na Ƙaddamarwa na Ƙaƙwalwa na Ƙaƙwal ) , gane aikin bugawa da lakabi a lokaci guda Ayyukan ciyarwa ta atomatik (hade tare da la'akari da samfur);
3. Ayyukan tarin kayan aiki na atomatik (haɗe tare da la'akari da samfurin);
4. Ƙara na'ura mai lakabi;
Hanyar daidaitawa ta FK815 tana da sauƙi: 1. Daidaita tsayin injin alamar, sanya gefen wuka mai lakabi ya fi 2mm fiye da tsayin samfurin kuma a daidai matakin.2. Daidaita bel mai ɗaukar sama, bel mai ɗaukar ƙasa da saurin lakabi akan allon taɓawa domin suna son daidaitawa.3. Daidaita matsayin firikwensin ta yadda kowane lakabin zai iya ƙare gaba ɗaya.4. Daidaita tsayin abin nadi, bari abin nadi kadan ya taɓa alamar alamar samfurin.
FK815 filin bene kusan 2.75 sitiya.
Keɓance Tallafin Inji.
Na'ura mai lakabin Corner FK815 yana da hanyoyin daidaitawa masu sauƙi, daidaitattun lakabi da inganci mai kyau, Mai dacewa da buƙatun madaidaicin madaidaici, samfurori masu girma, kuma yana da wuya a ga kuskure tare da ido tsirara.
Siga | Kwanan wata |
Ƙayyadaddun Label | Sitika mai mannewa, m ko mara kyau |
Yin Lakabi Haƙuri | ±1mm |
Iyawa (pcs/min) | 40-120 |
Girman kwalabe (mm) | L: 40 ~ 400 W: 40 ~ 200 H: 0.2 ~ 150; Za a iya musamman |
Girman lakabin kwat da wando (mm) | L:6~150;W(H):15-130 |
Girman Injin (L*W*H) | ≈1600*780*1400(mm) |
Girman Kunshin (L*W*H) | ≈1650*830*1450(mm) |
Wutar lantarki | 220V/50(60)HZ; Za a iya musamman |
Ƙarfi | 1030W |
NW(KG) | ≈ 180.0 |
GW(KG) | ≈ 360.0 |
Lakabin Roll | ID: Ø76mm;Saukewa: ≤280mm |
1. Danna tauraro akan allon taɓawa.
2. Samfurin da aka sanya kusa da shingen tsaro, sa'an nan bel mai ɗaukar kaya yana motsa samfuran gaba.
3. Lokacin da firikwensin ya gano cewa samfuran sun isa wurin da aka yi niyya, injin zai aika da alamar kuma abin nadi ya haɗa rabin alamar zuwa samfurin.
4. Sa'an nan a lokacin da samfurin da aka lakafta kuma isa wani matsayi, goga zai fito da kuma goga da sauran rabin lakabin a kan samfurin, cimma lakabin kusurwa.
1. Rata tsakanin lakabin da lakabin shine 2-3mm;
2. Nisa tsakanin lakabin da gefen takarda na kasa shine 2mm;
3. Ƙaƙƙarfan takarda na lakabin an yi shi da gilashi, wanda ke da kyau mai kyau kuma yana hana shi daga karya (don kauce wa yanke takarda);
4. Diamita na ciki na tsakiya shine 76mm, kuma diamita na waje bai wuce 280mm ba, an shirya shi a jere ɗaya.
Ana buƙatar samar da alamar da ke sama tare da samfurin ku.Don takamaiman buƙatu, da fatan za a duba sakamakon sadarwa tare da injiniyoyinmu!