④ Mokhoa oa ho fetola oa FK618 o bonolo: lokisa boto ea ho hula, fetola boemo ba sensor ea label ho fihlela leibole e le 'ngoe e ntšoa ebe o kenya hlobo e behang lihlahisoa tlas'a boto ea ho hula.Phetoho ea ts'ebetso e ka tlase ho metsotso e 10.
⑤ FK618 e nkile sebaka se ka bang 0.24 ster.
⑥ Tšehetso ea Mochini ho Itloaetsa.
Mochine oa ho ngola oa FK618 o na le mekhoa e bonolo ea ho fetola, ho nepahala ho phahameng ho fihla ho ± 0.2mm le boleng bo botle, 'me ho thata ho bona phoso ka mahlo.
Paramethara | Letsatsi |
Tlhaloso ea Label | Setikara sa sekhomaretsi, se bonaletsang kapa se lerootho |
Labeling Tolerance | ± 0.2mm |
Bokhoni(pcs/min) | 15-30 |
Saese ya botlolo ya sutu(mm) | L:20~200 W:20~180 H:0.2~85;E ka itlhophisa |
Saese ya leibole ya sutu(mm) | L:10-70;W(H):5-70 |
Boholo ba Mochini(L*W*H) | ≈600*500*800(mm) |
Boholo ba Pakete(L*W*H) | ≈650*550*850(mm) |
Palo ea li-volts | 220V/50(60)HZ;E ka etsoa ka mokhoa o ikhethileng |
Matla | 330W |
NW(KG) | ≈45.0 |
GW(KG) | ≈67.5 |
Label Roll | ID: Ø76mm;OD: ≤240mm |
Phepelo ea Moea | 0.4 ~ 0.6Mpa |
1. Ka mor'a hore sehlahisoa se behoe ka har'a hlobo, tobetsa konopo, 'me mochine o tla hula-leibole ka ntle.
2. Ha leibole e le 'ngoe e ntšoa kaofela, boto ea ho hula leibole e tla khahlisa leibole, ebe boto ea ho hula e tla theoha ho fihlela leibole e khomaretsoe sehlahisoa.
3. Label suction board e tla khutlela ho ea pele, 'me mochine o tla tsosolosa, mokhoa oa ho ngola o phethiloe.
① Lileibole tse sebetsang: Leibole ea setikara, filimi, khoutu ea tsamaiso ea elektroniki, khoutu ea bara.
② Lihlahisoa tse sebetsang: Lihlahisoa tse tlamehang ho ngoloa sebakeng se bataletseng, se bōpehileng joaloka arc, ho pota-pota, sekontiri, sekontiri kapa libaka tse ling.
③ Indasteri ea kopo: E sebelisoa haholo ho litlolo, lijo, lintho tsa ho bapala, lik'hemik'hale, lisebelisoa tsa elektroniki, meriana le liindasteri tse ling.
④ Mehlala ea ts'ebeliso: ho ngola libotlolo tse bataletseng tsa shampoo, ho ngola lebokose la liphutheloana, sekoaelo sa botlolo, ho ngola likhetla tsa polasetiki, jj.
1. Lekhalo pakeng tsa label le label ke 2-3mm;
2. Sebaka se pakeng tsa label le bohale ba pampiri e ka tlaase ke 2mm;
3. Pampiri e ka tlaase ea letšoao e entsoe ka glassine, e nang le boima bo botle 'me e thibela ho senya (ho qoba ho khaola pampiri e ka tlaase);
4. Bophara bo ka hare ba mokokotlo ke 76mm, 'me bophara ba ka ntle bo ka tlase ho 280mm, bo hlophisitsoeng ka mola o le mong.
Tlhahiso ea li-label e ka holimo e hloka ho kopanngoa le sehlahisoa sa hau.Bakeng sa litlhoko tse khethehileng, ka kopo sheba liphetho tsa puisano le baenjiniere ba rona!
Che. | Sebopeho | Mosebetsi |
1 | Label Tray | Beha moqolo oa label |
2 | Lirolara | Hlakola moqolo oa label |
3 | Label Sensor | Fumana label |
4 | Cylinder e romelang label | Romela leibole ka tlase ho hlooho ea ho ngola |
5 | Moqomo o betlang label-peeling | Khanna hlooho ho fumana laibole pampiring ea tokollo |
6 | Ho ngola Cylinder | Khanna hlooho ea ho tšoaea hore e khomarele sebaka se nchocho |
7 | Ho Labela Hlooho | Fumana laibole pampiring ea tokollo 'me u khomarele sehlahisoa |
8 | Tlhahiso ea Sehlahisoa | E entsoe ka mokhoa o ikhethileng, lokisa sehlahisoa ha u ntse u ngola |
9 | Sesebelisoa sa ho hula | E tsamaisoa ke enjene e hohelang ho hula leibole |
10 | Release Paper Recycling | Sebelisa hape pampiri ea tokollo |
11 | Emergency Stop | Emisa mochini haeba o sa sebetse hantle |
12 | Lebokose la Motlakase | Beha litlhophiso tsa elektroniki |
13 | Skrine se thetsoang | Ts'ebetso le ho beha paramente |
14 | Sefe ea Potoloho ea Moea | Sefa metsi le litšila |
1) Sistimi ea Taolo: Sistimi ea taolo ea Panasonic ea Japane, e nang le botsitso bo phahameng le sekhahla se tlase haholo sa ho hloleha.
2) Sistimi ea Ts'ebetso: Sesepa sa ho ama mebala, sebopeho se bonoang ka kotloloho ts'ebetso e bonolo.Sechaena le Senyesemane se fumaneha.Ho bonolo ho fetola liparamente tsohle tsa motlakase le ho ba le ts'ebetso ea ho bala, e thusang ho laola tlhahiso.
3) Mokhoa oa ho Hlahlobisisa: Ho sebelisa Sejeremane LEUZE / Setaliana sa datalogic label sensor le Japanese Panasonic product sensor , tse nang le boikutlo bo botle ho label le sehlahisoa , kahoo li netefatsa ho nepahala ho phahameng le ts'ebetso e tsitsitseng ea ho ngola.E pholosa mosebetsi haholo.
4) Mosebetsi oa Alamo: Mochini o tla fana ka alamo ha bothata bo hlaha, joalo ka label spill, label robehileng, kapa liphoso tse ling.
5) Lisebelisoa tsa Mochini: Mochini le likarolo tse ling kaofela li sebelisa tšepe e sa hloekang le alloy e phahameng ea aluminium, e hanyetsanang le kutu e phahameng ebile ha ho mohla e nang le mafome.
6) Hlomella ka transformer ea motlakase ho ikamahanya le motlakase oa lehae.